Concrete Technology

By

Concrete Technology



Concrete is a construction material composed of cement, fine aggregates (sand) and coarse aggregates mixed with water which hardens with time. Portland cement is the commonly used type of cement for production of concrete. Concrete technology deals with study of properties of concrete and its practical applications.
In a building construction, concrete is used for the construction of foundations, columns, beams, slabs and other load bearing elements.
There are different types of binding material is used other than cement such as lime for lime concrete and bitumen for asphalt concrete which is used for road construction.
Various types of cements are used for concrete works which have different properties and applications. Some of the type of cement are Portland Pozzolana Cement (PPC), rapid hardening cement, Sulphate resistant cement etc.
Materials are mixed in specific proportions to obtain the required strength. Strength of mix is specified as M5, M10, M15, M20, M25, M30 etc, where M signifies Mix and 5, 10, 15 etc. as their strength in kN/m2. In United States, concrete strength is specified in PSI which is Pounds per Square Inch.
Concrete
Water cement ratio plays an important role which influences various properties such as workability, strength and durability. Adequate water cement ratio is required for production of  workable concrete.
When water is mixed with materials, cement reacts with water and hydration reaction starts. This reaction helps ingredients to form a hard matrix that binds the materials together into a durable stone-like material.
Concrete can be casted in any shape. Since it is a plastic material in fresh state, various shapes and sizes of forms or formworks are used to provide different shapes such as rectangular, circular etc.
Various structural members such as beams, slabs, footings, columns, lintels etc. are constructed with concrete.
ACI 318 Building code requirements for structural concrete and ACI 301 Specifications for Structural Concrete are used in United States as standard code of practice for concrete construction.
There are different types of admixtures which are used to provide certain properties. Admixtures or additives such as pozzolans or superplasticizers are included in the mixture to improve the physical properties of the wet mix or the finished material.
Various types of concrete are manufactured these days for construction of buildings and structures. These have special properties and features which improve quality of construction as per requirement.

Components of Concrete

Components of concrete are cement, sand, aggregates and water. Mixture of Portland cement and water is called as paste. So, concrete can be called as a mixture of paste, sand and aggregates. Sometimes rocks are used instead of aggregates.
The cement paste coats the surface of the fine and coarse aggregates when mixed thoroughly and binds them. Soon after mixing the components, hydration reaction starts which provides strength and a rock solid concrete is obtained.

What is Grade of Concrete?

Grade of concrete denotes its strength required for construction. For example, M30 grade signifies that compressive strength required for construction is 30MPa. The first letter in grade “M” is the mix and 30 is the required strength in MPa.
Based on various lab tests, grade of concrete is presented in Mix Proportions. For example, for M30 grade, the mix proportion can be 1:1:2, where 1 is the ratio of cement, 1 is the ratio of sand and 2 is the ratio of coarse aggregate based on volume or weight of materials.
The strength is measured with concrete cube or cylinders by civil engineers at construction site. Cube or cylinders are made during casting of structural member and after hardening it is cured for 28 days. Then compressive strength test is conducted to find the strength.
Regular grades of concrete are M15, M20, M25 etc. For plain cement concrete works, generally M15 is used. For reinforced concrete construction minimum M20 grade of concrete are used.
Concrete GradeMix RatioCompressive Strength
MPa (N/mm2)psi
Normal Grade of Concrete
M51 : 5 : 105 MPa725 psi
M7.51 : 4 : 87.5 MPa1087 psi
M101 : 3 : 610 MPa1450 psi
M151 : 2 : 415 MPa2175 psi
M201 : 1.5 : 320 MPa2900 psi
Standard Grade of Concrete
M251 : 1 : 225 MPa3625 psi
M30Design Mix30 MPa4350 psi
M35Design Mix35 MPa5075 psi
M40Design Mix40 MPa5800 psi
M45Design Mix45 MPa6525 psi
High Strength Concrete Grades
M50Design Mix50 MPa7250 psi
M55Design Mix55 MPa7975 psi
M60Design Mix60 MPa8700 psi
M65Design Mix65 MPa9425 psi
M70Design Mix70 MPa10150 psi

How to Make Concrete?

Concrete is manufactured or mixed in proportions w.r.t. cement quantity. There are two types of concrete mixes, i.e. nominal mix and design mix. Nominal mix is used for normal construction works such as small residential buildings. Most popular nominal mix are in the proportion of 1:2:4.
Design mixed concrete are those for which mix proportions are finalized based on various lab tests on cylinder or cube for its compressive strength. This process is also called as mix design. These tests are conducted to find suitable mix based on locally available material to obtain strength required as per structural design. A design mixed offers economy on use of ingredients.
Once suitable mix proportions are known, then its ingredients are mixed in the ratio as selected. Two methods are used for mixing, i.e. Hand Mixing or Machine Mixing.
Based on quantity and quality required, the suitable method of mixing is selected. In the hand mixing, each ingredients are placed on a flat surface and water is added and mixed with hand tools. In machine mixing, different types of machines are used. In this case, the ingredients are added in required quantity to mix and produce fresh concrete.
Once the it is mixed adequately it is transported to casting location and poured in formworks. Various types of formworks are available which as selected based on usage.
Poured concrete is allowed to set in formworks for specified time based on type of structural member to gain sufficient strength.
After removal of formwork, curing is done by various methods to make up the moisture loss due to evaporation. Hydration reaction requires moisture which is responsible for setting and strength gain. So, curing is generally continued for minimum 7 days after removal of formwork.

Types of Concrete Construction

Concrete is generally used in two types of construction, i.e. plain concrete construction and reinforced concrete construction. In PCC, it is poured and casted without use of any reinforcement. This is used when the structural member is subjected only to the compressive forces and not bending.
When a structural member is subjected to bending, reinforcements are required to withstand tension forces structural member as it is very weak in tension compared to compression. Generally, strength of concrete in tension is only 10% of its strength in compression.
It is used as a construction material for almost all types of structures such as residential concrete buildings, industrial structures, dams, roads, tunnels, multi storey buildings, skyscrapers, bridges, sidewalks and superhighways etc.
Example of famous and large structures made with concrete are Hoover Dam, Panama Canal and Roman Pantheon. It is the largest human made building materials used for construction.

Steps of Concrete Construction

The construction steps are:
  1. Selecting quantities of materials for selected mix proportion
  2. Mixing
  3. Checking of workability
  4. Transportation
  5. Pouring in formwork for casting
  6. Vibrating for proper compaction
  7. Removal of formwork after suitable time
  8. Curing member with suitable methods and required time.

Comments

Post a Comment

Popular posts from this blog

Concrete Floor Slab Construction Process

By
Image
Concrete floor slab construction process includes erection of formwork, placement of reinforcement, pouring, compacting and finishing concrete and lastly removal of formwork and curing of concrete slab. Table of Contents Concrete Floor Slab Construction Process 1. Assemble and Erect Formwork for Slab 2. Prepare and Place Reinforcement for Slab 3. Pour, Compact and Finishing Concrete Floor Slab 4. Curing Concrete and Remove Formwork Concrete Floor Slab Construction Process Assemble and Erect Formwork Prepare and Place Reinforcement Pour, Compact and Finish Concrete Curing Concrete and Remove Formwork 1. Assemble and Erect Formwork for Slab The formwork shall be designed to withstand construction loads such as fresh concrete pressure and weight of workers and operators and their machines. Guide to Formwork for Concrete ACI 347-04 shall be followed for the design of formworks. Moreover, there are various construction aspects that need to be considered during...
Read more

Steel Pile Foundations – Types, Design and Connections

By
Image
Precast piles and driven cast in piles make use of steel pipes. In the case of precast or totally performed piles, there are two classification such as hollow small displacement piles and solid piles. The hollow small displacement piles make use of  steel pipes  when steel pile foundation is recommended. When it comes to solid piles,  steel H- piles  are used. In the case of driven cast in place piles the main classification is concrete tube steel tube. In case of steel tubes, we make use of  closed ended tube  and  open-ended tubes. Generally, the steel piles can be classified as: Screw Piles Disc Piles H-piles Disc Piles Commonly used steel piles are rolled steel H section piles or pipe piles. The pipe piles have either an open or a closed end that is driven into the ground. I-section or wide flange piles can also used as pile foundation. The H-sections are preferred more over I-sections, as the H-section have same thickness for the w...
Read more

How to Construct Concrete Stairs?

By
Image
Construction of concrete stairs includes steps such as designing, preparing foundation, building formwork, placement of reinforcement steel bars, concreting, finishing and curing. Construction of concrete stairs is a difficult task that requires an engineer to study all the aspects and design it and a skilled labour to construct it.In this article we explain you the detailed method of how to construct a concrete stairs from start to end. Fig 1: Concrete Stairs Table of Contents Steps for Construction of Concrete Stairs   1. Designing of Concrete Stairs 2. Foundation and Support for Concrete Stairs 3. Building the Form-work for Concrete Stairs 4. Steel Reinforcement for Concrete Stairs 5. Pouring of Concrete for Concrete Stairs 6. Removal of Formwork  7. Finishing of Concrete Stairs Steps for Construction of Concrete Stairs   The followings are the steps involved in construction of concrete stairs, 1. Designing of Conc...
Read more